Ford Volvo Freightliner Kenworth International Harvester Sterling Truck Rear Sump Steel Engine Oil Pan Replacement

We focus on the stamping forming bending welding part for engine oil pan, transmission oil filter, transmission oil pan, oil dipstick ,oil pickup tube strainer,auto coolant pipe ,bypass water pipe ,engine cylinder inlet water pipe ,thermostat cover ,thermostat connector pipe almost 30 years.

Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.

31390-80X0A

Transmission oil pan reverse engineer 

Got the outside profile of the oil pan by scanning .

Stamping press workshop
The most popular engine oil pan was produce by the stamping drawing ,we had about 30 set of stamping press cover from 30T to 2100T,those hydraulic pressure stamping machine can made the engine oil pan for auto to heavy duty truck engine oil sump from front oil sump to rear oil sump,the baffle and the other engine part bracket also produce in this workshop.

---

Stamping Workshop
Overview of the Stamping workshop with cover the
Stamping equipment   from 100T to 800T.
Hydraulic Press cover from 50T to 3100T.
With the mold(die,tooling) produce by ourselves we can customize all kinds of metal shape according to customer drawing call out.

---

Stamping press deep drawing production process after the raw material blanking .
The shape of the oil pan start from this production process.

---

3D laser cutting production process ,when we develop a new project for a stamping part ,to short the lead time we will use the laser cutting production process instead of the stamping mold to take off the raw material as the drawing call out .the most beneficial for the 3D laser cutting machine was short the leadtime for the development.

---

09G transmission oil pan development process

• To development the pan we need the drawing or sample .let`s start with the reverse engine project for the 09g transmission oil pan 

1.We will scanning the sample of 09g transmission pan .

2.Read the data from the sample and create the 3D drawing .

3.Simulation of the stamping production process .

4.Get to know where the 09g transmission oil sump easy to break or wrink.

---

---

The drawing press mold create by solidwork and simulation stamping by the J STAMPING software or CAE.

Stamping process for the 09g pan ,

Normally stamping process start from decoiling ,shear the steel plate sheet from the coil steel packing

Then stamping press the steel plate to form the shape as we need.

---

Engine oil pan leaking test

The engine oil sump was made by the steel plate sheet ,it maybe broken during the metal stamping drawing production process ,so each pan need to go though the leaking test before paint and ship 

---

Bolt hole flatness inspection 

The surface of the oil pan get in touch with the cylinder so the flantess need to be check before packing made sure that will not leaking oil after install pan on cylinder

Flatness:0.1mm between two holes.0.3mm among 250mm

---

215102G500

   

21510-2G050

   

2151025050

   

4884665AE

   

21510-25055

   

215102G001

   

215102G002

   

311-50145

   

21510-2G500

   

4884665AD

   

2151025050

   

215102G050

   

311-50463

   

21510-2G001

   

215102G002

   

2151025051

   

215102G500

   

215102G050

   

311-00133

   

2151025055

   

215102G001

   

4884665AD

   

21510-25053

   

21510-25050

   

215102G050

   

21510-25051

   

2151025055

   

4884665AC

   

21510-2G050

   

2151025053

   

4884665AE

   

2151025051

   

311-50468

   

21510-2G002

   

2151025053